Membrane Press Machine

Membrane Press Machine

           Machine test in factory workshop

           Membrane press working in Vietnam
Membrane press machine is also called positive & negative press machine. It can be used for veneer laminating on the wooden door, or laminating veneers on the door panels on both sides (One side can be laminated too). There is hydraulic system, vacuum system, PLC auto control system etc. With silicon rubber sheet and hydraulic pressure, both sides shaped work pieces can be well laminated with veneers.


3 Phase 380V, 50Hz or customized

Working table size

2300mm×1100mm (inner size)

Max height of workpiece


Positive pressure

≤0.5Mpa  (Max compressed air pressure 5kg/cm2)

Negative pressure

≥-0.095Mpa (Max vacuum pressure 1kg/cm2)

Total power


Consumption power



125 ℃ (Adjustable)

Heating method

Electrical heating plate (Heating pipe in the plate)

Cycle time

Around 5-6 mins (Depends on glue type, veneer thickness, workpiece size etc)


Multi-functional. Two sides in one time; or one side  


1 Year

Payment item

30% as down payment, 70% before shipment


Main press Pearl cotton+ PE film. Accessory in steel box

One 20 feet container for whole set

Delivery time

30 working days 

Overall size


Total weight

9300 Kg

1. DELTA brand PLC auto control and touch screen. Reasonable pressure and temperature showing

2. Two working table with easy-pull and push design—improve efficiency and easy to maintenance

3. Reasonable control cabinet. SCHNEIDER contactor. WEIDERMILLER relay. Top Chinese brand breaker

4.  Chinese brand vacuum pump but adopt German technology.
1).Same structure.  2).Low noise.  3).High quality. 4).Stable. 5).Easy to maintenance.

5. COMPASS motor and pump imported from Taiwan.
1).Plug-in design. Humanistic. 2).High flow. 3).Rapid pressure. 4).Stable.



Related Products :

Membrane Press Machine
Home | About Us | Products | Videos | News | Successful Case | FAQ | Contact Us | SiteMap
Copyright (c) CHANCS MACHINE All Rights Reserved