Conveyor Belt Type High Frequency Edge Glued Panel Press

Conveyor Belt Type High Frequency Edge Glued Panel Press

Fully auto (Auto feeding+ auto gluing + auto loading+auto pressing)

Semi-auto type (Auto feeding+auto pressing) for short panel

                           2500mm long panel laminating

                                   Machine working in Indonesia

Conveyor Belt Type High Frequency Edge Glued Panel Press

This model is the best choice for short furniture panel joining. Width and length can be free jointed.
There are following advantages:
1). Can place wood pieces in right position, avoiding dislocation problem and damage cylinder.
2). Machine working table processed by non-cohesive material. Glue is easy to remove and assure panel quality.
3). Top working table designed with lifting device. Make sure panel straight and flatness.Save more wood material for next sanding process.
4). Locate high frequency generator and hydraulic system on the top of machine, saving factory space.
6). High efficiency: HF heating 1-2minutes finish one standard panel(8x4 feet, 20mm thick ).
7).Low power costs: HF power only heat glue line, save the power. (0.6-1 kwh per panel)
8).Labor saving: Automatic control. One button can finish whole cycle.
9).No pollution: HF power only needs electricity, dust free and clean

Model HFEG-2580C-CH HFEG-3280C-CH HFEG-4280C-CH HFEG-5280C-CH
Control Type PLC Automatically control, fault checking and alarming
Working table 2500x1300mm 3200x1300mm 4200x1300mm 5200x1300mm
Thickness 10-80mm 10-80mm 10-80mm 10-80mm
Vertical Pressure 12T 12T 24T 24T
Horizontal Pressure 36T 48T 60T 72T
Feeding Type   One Button Automaticlly Conveyor Belt Feeding

←[Previous:] [Next:]→

Related Products :

Elevator-platform Type High Frequency Edge Glued Panel Press

High Frequency Edge Glued Panel Press

Dual Workingtable HF Edge Glued Panel Press
Home | About Us | Products | Videos | News | Successful Case | FAQ | Contact Us | SiteMap
Copyright (c) CHANCS MACHINE All Rights Reserved