CHANCS MACHINE

       
Products

3D Pressure HF Plywood Bending Press

3D Pressure HF Plywood Bending Press


3D Pressure HF Plywood Bending Press

1. Introduction
3D pressure is short of three direction pressure. There are three direction pressure from different side on the hydraulic press, which is very suitable for complex shape of plywood bending/ glued veneer bending. Such as big side "U" shape bending, art tea table bending, sound box bending etc. Considering the production efficiency, it equps 30-50KW High frequency generator for heating. HF generator only use electricity, clean and easy to operate. When you switch on, it can reach to high temprature within seconds. Once cut off the power, HF power will be off and stop heating at the same time. That is dielectric heating method, fast, convenient, clean and power saving. 

2. Features of 3D HF plywood bending press 
1). 3D pressure can meet different shapes of plywood bending requirement and help customer develop more designs.
2). HF heating is dielectric heating. It heats products by friction of water melocules, fast, uniformly and effective (Chair bending needs 3-4 mins per cycle)
3). HF power is selective heating. It focus on glue heating but not heat the wood material, saving energy.  
4). High quality. After pressing, plywood shape is steady and hard to change.
5). HF bending press can work with metal mold, plywood mold as well as MDF mold. There are more choice for end user. Customer can make mold themselves easily.
6). HF power needs only electricity, clean and dust free.

3. Specification on 3D HF Plywood Bending Press

Model

HFPB-1806T-CH

HFPB-1808T-CH

Power

3Phase 4 Wires AC380V 50Hz, or customized

Top Working 
Table

1800x600mm

1800x800mm

Bottom Working
Table

2100x600mm

2100x800mm

Total Pressure

130T

170T

Vertical Pressure

90T

120T

Horizontal Pressure

40T

50T

Output 

Two outputs (One HF drives two press)

Weight

8500Kg

9000Kg





 

←[Previous:] [Next:]→

Related Products :

High Frequency Plywood Bending Press

Customized HF Plywood Bending Press

Three Direction High Frequency Plywood Bending Press
Home | About Us | Products | Videos | News | Successful Case | FAQ | Contact Us | SiteMap
Copyright (c) CHANCS MACHINE All Rights Reserved